| HOME | HELP | FEEDBACK | SUBSCRIPTIONS | ARCHIVE | SEARCH | TABLE OF CONTENTS |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Previous Article | Next Article ![]()
Eukaryotic Cell, May 2007, p. 776-785, Vol. 6, No. 5
1535-9778/07/$08.00+0 doi:10.1128/EC.00015-07
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

,
Cara L. Griffith,
Hong Liu,
Ashley A. Nenninger, and
Tamara L. Doering*
Department of Molecular Microbiology, Washington University School of Medicine, St. Louis, Missouri
Received 12 January 2007/ Accepted 27 February 2007
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
To generate the extensive array of mannosylated compounds described above, yeasts must supply appropriate mannose donor molecules to the enzymes that mediate their synthesis. The simplest donor is the nucleotide sugar GDP-mannose (GDP-Man), described by Cabib and Leloir in 1954 (11). This compound is generated in the cytosol by the sequential actions of phosphomannose isomerase, phosphomannomutase, and GDP-Man pyrophosphorylase (57). Some GDP-Man is consumed at the cytosolic face of the endoplasmic reticulum by incorporation into a dolichol phosphomannose lipid that is then flipped into that organelle and used to synthesize N-linked core oligosaccharides and glycosylphosphatidylinositol anchors (23). Much of it, however, is used within the Golgi complex for the synthesis of glycolipids and O-linked glycans (59) and for the outer-chain elaboration of core N-linked structures (14, 36). The location of these synthetic processes leads to a topological problem, which is solved in yeast by the presence of specific Golgi apparatus-localized GDP-Man transporters (1, 15, 38, 39). These proteins import the highly charged mannose precursor from the cytosol into the Golgi apparatus, operating against a concentration gradient via an antiport mechanism that exchanges GDP-Man for GMP. Notably, because mammalian cells do not perform mannosylation in the Golgi apparatus, they have no GDP-Man transporters, although these transporters have been described for plants (8, 22) and for the protozoan parasite Leishmania donovani (33).
Our studies focus on the fungal pathogen Cryptococcus neoformans. This organism causes serious disease and life-threatening meningitis, especially in the context of compromised immunity. In addition to using mannose for the synthesis of protein- and lipid-linked structures in the manner described above, C. neoformans incorporates this sugar into an extensive polysaccharide capsule that surrounds the cell wall (reviewed in reference 10). The capsule, which is required for virulence, is composed of two polysaccharides. The larger polymer, glucuronoxylomannan (GXM), has a repeating structure with monosaccharide branches of xylose and glucuronic acid linked to a mannose backbone (13). Mutants that do not synthesize GXM do not cause disease in experimental animal models (12). The second polymer, galactoxylomannan, has a galactose backbone, with side chains composed of galactose, xylose, and mannose (56); its biological function is less well understood.
We have recently found material that reacts with anti-GXM antibodies in post-Golgi exocytic vesicles in C. neoformans (60). This finding indicates that capsule components are made within secretory organelles and are then packaged into transport vesicles for release at the cell surface when those vesicles fuse with the plasma membrane. In this scenario, capsule synthesis, like the other luminal processes mentioned above, will rely on GDP-Man import via a nucleotide sugar transporter. Mannose comprises one- to two-thirds of all sugar residues in the capsule, depending on the serotype of C. neoformans, so the demands for this transport will be high.
Almost 20 years ago, Hirschberg and coworkers demonstrated GDP-Man transport in yeast by using a mixed vesicle preparation from S. cerevisiae (3). A putative GDP-Man transporter was not identified until almost 10 years later, however, when Turco, Beverley, and colleagues showed that microsomes isolated from wild-type L. donovani were able to import this compound, while cells mutated in the LPG2 gene could not. The mutant cells lost the ability to transport GDP-Man but not UDP-galactose, and the defect was corrected by the reintroduction of the gene (33). Although this initial study did not prove that Lpg2 itself was the transport protein, subsequent work showed that Lpg2 could mediate GDP-Man transport activity when expressed in mammalian cells (25), and recent reconstitution experiments proved that this protein is indeed the transporter (51). Interestingly, Lpg2 acts as a hexameric complex and is multifunctional, with the ability to transport GDP-Man, GDP-arabinose, and GDP-fucose (25). The Leishmania parasite uses GDP-Man in the synthesis of its surface coat and related molecules. lpg2 mutants lack normal forms of these molecules but still demonstrate normal N glycosylation, glycosylphosphatidylinositol anchors, glycolipids, and growth (33).
Close to the time that Lpg2 activity was described, Dean and colleagues used a permeabilized cell assay to demonstrate GDP-Man transport in S. cerevisiae and to implicate the yeast protein Vrg4 in this process (15). Those authors had previously shown that Vrg4 was required for N-linked mannosylation, secretion, and protein sorting (44); based on in vitro transport studies of mutant and wild-type strains, and the protein's homology to other known nucleotide sugar transporters, they suggested that it was the transporter itself. Subsequent work on Vrg4 defined a conserved motif required for substrate binding, showed that the protein occurred as a dimer and was localized to the Golgi apparatus, and identified regions responsible for dimerization, stability, and trafficking (1, 2, 17, 18). Unlike the case with the Leishmania Lpg2 protein, Vrg4 is essential for viability in yeast (44).
Although Vrg4 and Lpg2 have been the most thoroughly examined, several other GDP-Man transporters have been identified in the decade since these two proteins were first implicated in this process. These transporters have been identified by sequence homology and by their ability to complement a partial mutant in VRG4, vrg4-2, but they have not been characterized biochemically. In the fungal pathogen Candida albicans, the single Vrg4 homolog is Golgi apparatus localized and essential for viability, similar to S. cerevisiae Vrg4; a partial loss of function of this protein led to mannosylation defects that caused cell wall-associated phenotypes (39). In a related pathogen, Candida glabrata, deletion of the single VRG4 homolog was also lethal (38). Additional studies of Vrg4 have focused on its utility as a marker of the Golgi apparatus in fungi in both S. cerevisiae (32) and Pichia pastoris (4).
We have investigated GDP-Man transport in C. neoformans, motivated by the central role of mannose in the major cryptococcal virulence factor, the capsule, and by the fact that GDP-Man transport is a fungus-specific activity and therefore an intriguing potential drug target. We have discovered that Cryptococcus encodes and expresses two functional transporters of GDP-Man, a unique finding among fungi. Direct assays of activity in permeabilized cells show that the two proteins have similar biochemical properties. However, transcriptional analysis indicates that they are not coordinately regulated and are therefore likely to play distinct roles in cryptococcal biology. Furthermore, deletion of the two genes results in contrasting capsule phenotypes: gmt1 mutants have reduced capsule size and the ability to induce capsule, while gmt2 cells appear to have wild-type capsules.
| MATERIALS AND METHODS |
|---|
|
|
|---|
, from Jennifer Lodge, Saint Louis University Medical Center) and JEC43 (MAT
ura5, from Joe Heitman, Duke University Medical Center), and serotype A wild-type strain H99 (MAT
, from Gary Cox, Duke University Medical Center). S. cerevisiae strains used were NDY5 (MAT
ura3-52 leu2-211 vrg4-2) (15) and JPY26 3d (MAT
ura3-52 leu2-3,112 ade2-101 vrg4-2 dpm1) (15), provided by Neta Dean (State University of New York at Stony Brook). All cells were grown with continuous shaking at the temperatures indicated in the text in the following media: YPD (1% Bacto yeast extract, 2% peptone, 2% dextrose); YNB (6.7 g/liter Bacto yeast nitrogen base [pH 7.0]) with 2% dextrose, 2% sodium acetate, 2% sodium succinate, or 1 mM H2O2; YNB (pH 4.0) with 1 mM NaNO2; low-iron medium (LIM) (as described in reference 41) with 0.5% dextrose, 100 µM EDTA, and 100 µM bathophenanthroline disulfonic acid (BPDS); LIM lacking BPDS; Dulbecco's modified Eagle's medium (DMEM); Littman's medium (as described in reference 29) with either 0.01 or 1 mg/ml thiamine; phosphate-buffered saline (PBS); PBS with 10% fetal bovine serum (as described in reference 62); minimal medium with 2% glucose but lacking uracil (as described in reference 6); or minimal medium lacking leucine and supplemented with 0.5 M KCl. Sequences and alignment. The S. cerevisiae Vrg4 protein sequence (GenBank accession number NP_011290 [GenBank] ) was BLAST searched against the C. neoformans serotype D database compiled by The Institute for Genome Research (http://www.tigr.org/tdb/e2k1/cna1/). Two closely related sequences were identified and assessed using the Align X program within Vector NTI (Invitrogen, Carlsbad, CA). The first gene (TIGR accession number CNF12620 and GenBank accession number AAY85624 [GenBank] ) encoded a predicted protein that is 49% identical and 65% similar to Vrg4, which we termed GMT1 for GDP-Man transporter 1. The second gene (TIGR accession number CNG01600 and GenBank accession number AAR96298 [GenBank] ) encoded a protein with 46% identity and 63% similarity to Vrg4 and was named GMT2.
Gene cloning and expression in S. cerevisiae. Yeast episomal plasmids containing a 2µm origin of replication, the GAP (glyceraldehyde-3-phosphate dehydrogenase) promoter, and the URA3 marker, without or with the VRG4 sequence (YEp352GAP and YEp352GAP-VRG4, respectively), were obtained from Neta Dean. We used standard PCR techniques and primers 401 to 404 in Table 1 to amplify GMT1 and GMT2 from JEC43 cDNA (prepared as described in reference 47) and incorporate flanking restriction sites (5' EcoRI and 3' KpnI). The resulting segments were inserted between the corresponding sites of YEp352GAP, and the constructs were transformed into NDY5 cells by electroporation for assessments of growth phenotype. Each plasmid was further modified by the insertion of LEU2 (amplified from S. cerevisiae genomic DNA using primers 405 and 406 in Table 1) at the ApaI site of each plasmid. These constructs were electroporated into JPY26 3d, and the resulting strains were used for transport assays.
|
Transport assays using "semi-intact cells." "Semi-intact cells" were prepared as described previously by Dean and colleagues (15), with minor modifications. Fifty-milliliter cultures of S. cerevisiae cells carrying the indicated plasmids were grown overnight, and a portion of each culture was diluted into a 200-ml volume to achieve an OD600 reading of 1 to 2 units on the following day. Cells were collected by centrifugation (5 min at 1,800 x g at room temperature [RT]), resuspended at 50 OD600 units/ml in 100 mM Tris (pH 9.4)-10 mM dithiothreitol, and incubated at RT for 5 min. Cells were then collected as described above and resuspended at 50 OD600 units/ml in spheroplast buffer (0.75x yeast peptone, 0.7 M sorbitol, 0.5% glucose, 10 mM Tris [pH 7.5]), and the OD600 value of a 1:100 sample in water was measured. An equal volume of 20 mg/ml of Lysing Enzymes (Sigma, St. Louis, MO) in spheroplast buffer was added to the remaining cell suspension, the cells were incubated at 30°C, and the OD600 value of 1:10 dilutions of the sample was checked every 5 min. Once the cells reached 90% lysis, they were subjected to centrifugation (3 min at 1,500 x g at RT), gently resuspended at 50 OD600 units/ml in regeneration buffer (0.75x yeast peptone, 0.7 M sorbitol, 1% glucose), and incubated at 30°C for 20 min. Cells were collected as described above except that it was done at 4°C, gently resuspended at 100 OD600 units/ml in lysis buffer (0.4 M sorbitol, 0.15 M potassium acetate, 2 mM magnesium acetate, 20 mM HEPES-KOH [pH 6.8]), sedimented as described above at 4°C, and resuspended at 300 OD600 units/ml in lysis buffer. Portions (150 µl) were aliquoted into 1.5-ml microcentrifuge tubes on ice, frozen over liquid nitrogen for 1 h, and transferred to storage at 70°C.
For assays, semi-intact cells were thawed quickly and washed three times in 1 ml of ice-cold buffer H (20 mM HEPES [pH 6.8], 150 mM potassium acetate, 250 mM sorbitol, 5 mM magnesium acetate). Standard reaction mixtures included 50 nCi of GDP-[3H]mannose (GDP-[3H]Man) (20 Ci/mmol; American Radiolabeled Corporation, St. Louis, MO), 3 µM GDP-Man, and 30 µg yeast protein (determined by a protein assay; Bio-Rad, Hercules, CA) in a final volume of 25 µl buffer H. Samples were incubated at 30°C for 5 min, incubation was stopped by the addition of 500 µl of ice-cold buffer H, and samples were immediately centrifuged (15 min at 14,000 x g at 4°C). The pellets were washed gently three times with 1 ml cold buffer H, with brief centrifugation (30 s at 14,000 x g at 4°C) between each wash, and the membranes were then resuspended in 100 µl 0.1% Triton X-100 and incubated at RT for 30 min before 50-µl samples were assessed by scintillation counting.
Quantitative reverse transcriptase PCR. RNA for reverse transcriptase PCR studies was prepared from 100-ml cultures of JEC21 cells grown at 30°C in YPD medium or LIM either overnight (for exponential phase) or for 2 days (stationary growth). Total RNA was extracted with TRIzol reagent as described previously (30), purified using an RNeasy Maxi kit (QIAGEN, Valencia, CA) according to the manufacturer's instructions, and treated with DNase I (Invitrogen). Reverse transcriptase reactions were performed with 10 µg of total RNA, oligo(dT) primers, and SuperScript II reverse transcriptase (Invitrogen) according to the manufacturer's instructions. Real-time PCRs used EZ RT-PCR Core Reagents and probes that were designed using Applied Biosystems PRIMEREXPRESS software, both obtained from Applied Biosystems. The probes and primers used (from Invitrogen) are listed as sequences 415 to 423 in Table 1. Experiments were performed using an ABI Prism 7000 instrument according to the manufacturer's instructions, with ACT1 expression serving for normalization between conditions. The amplification program consisted of 1 min at 60°C, 10 min at 95°C, and 40 cycles of 15 s at 95°C alternating with 1 min at 60°C. Each PCR experiment included serial dilutions of known concentrations of each DNA to be analyzed, which were used to generate a standard curve for product quantitation.
RNA for microarray analysis. Total RNA was prepared from 100-ml cultures of the indicated strain grown to an OD600 value of 1 to 2 units. Cells were sedimented (5 min at 6,000 x g at 4°C), washed with 50 ml diethyl pyrocarbonate-treated double-distilled water, and sedimented again, and the pellet was frozen in a dry ice-methanol bath and lyophilized overnight. Each dried cell pellet was vigorously vortex mixed with 3 ml of 0.5-mm glass beads (Biospec, Bartlesville, OK) for 15 min and then combined with 8 ml RT TRIzol reagent (Invitrogen) and vortex mixed for an additional 1 min. Tubes were left at RT for 5 min, mixed with 1.6 ml of chloroform, shaken gently, and incubated for 3 min at RT. The mixture was transferred to a fresh tube, covered with parafilm, and centrifuged (15 min at 7,600 x g at RT). The upper aqueous phase was removed to a fresh tube, slowly mixed with 1 volume of 70% ethanol, and applied to an RNeasy Maxi column, which was centrifuged in a swinging-bucket rotor (5 min at 3,000 x g at RT). The flowthrough fraction was reapplied to the column and eluted as described above, and the column was then washed, treated with RNase-Free DNase (QIAGEN), washed, and eluted according to the manufacturer's instructions. Eluted RNA was precipitated with a 1/10 volume of 3 M sodium acetate and 2.5 volumes of absolute ethanol on dry ice, and the pellet was recovered by centrifugation (15 min at 8,000 x g at 4°C), washed with 75% ethanol, and allowed to air dry before resuspension in formamide at 4 mg/ml and storage at 20°C. For analysis, RNA was precipitated and resuspended in diethyl pyrocarbonate-treated water, and the concentration and purity were determined from absorbance readings at 260 nm and 280 nm. Total RNA quality was assessed using an Agilent 2100 Bioanalyzer (Agilent Technologies) according to the manufacturer's recommendations.
We generated a reference pool of RNA by combining 67 independent RNA preparations from 27 combinations of strains and growth conditions. The cells used for RNA preparation were JEC21 grown in YPD (at 25°C, 30°C, and 37°C), YNB plus glucose (at 25°C, 30°C, 33°C, and 37°C), YNB plus acetate (at 30°C and 37°C), YNB plus succinate (at 30°C), YNB plus NaNO2 (at 25°C), YNB plus H2O2 (at 25°C), LIM with and without BPDS (at 37°C), DMEM (grown in room air or 5% CO2 at 37°C), Littman's medium (both thiamine concentrations at 37°C), and PBS (with or without fetal bovine serum at 37°C); H99 grown in YNB plus glucose (at 30°C) and JEC43, JEC43 with pCMT1/ADE2i (52), JEC43 with pADE2i (30), JEC43 with pAGS1i (46), JEC43 cmt1
(52), and JEC43 ags1
(47), all grown at 30°C in minimal medium lacking uracil. The pooled RNA samples were mixed thoroughly and aliquoted for storage at 70°C so that the same reference RNA could be used for all microarray experiments. Further details are available upon request.
Microarray construction, hybridization, and data analysis. A total of 7,738 70-nucleotide oligonucleotide probes specific for C. neoformans serotype D were synthesized by standard methods by Illumina Corporation (San Diego, CA) and dissolved at 20 nM in 3x SSC (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate) with 0.75 M betaine. Probes were printed in duplicate, along with control oligonucleotides, on MWG Epoxy slides (MWG Biotech Inc., High Point, NC) using a locally constructed linear servo arrayer (after the DeRisi model [http://derisilabs.ucsf.edu/]). Details of probe design and sequences are available at http://genome.wustl.edu/activity/ma/cneoformans/array_spec.cgi.
To label RNA transcripts, first-strand cDNA was generated by oligo(dT)-primed reverse transcription (Superscript II; Invitrogen) using the 3DNA Array 350 kit (Genisphere, Hatfield, PA) and modified oligo(dT) primers in which a fluorophore/dendrimer-specific sequence occurs at the 5' end of the dT primer. For cDNA synthesis, 1 µl fluorophore-specific oligo(dT) primer was added to 8 µg total RNA, and the solution was incubated at 80°C for 10 min and then cooled on ice for 2 min. Each sample was then combined with 1 µl RNase inhibitor (Superase-In; Ambion, Foster City, CA), 4 µl 5x first-strand buffer, 1 µl deoxynucleoside triphosphate mix (10 mM each dATP, dCTP, dGTP, and dTTP), 2 µl 0.1 M dithiothreitol, and 1 µl Superscript II RNase H reverse transcriptase (Invitrogen). Reverse transcription was allowed to proceed for 2 h at 42°C, at which point the reaction was terminated by the addition of 3.5 µl 0.5 M NaOH-50 mM EDTA, incubated for 15 min at 65°C, and neutralized with 5 µl 1 M Tris-HCl (pH 7). Samples to be cohybridized were then combined and concentrated using Microcon YM30 microconcentrators (Millipore, Billerica, MA) according to the manufacturer's recommendations.
For hybridization, each sample pair (
5 µl) was mixed with 26 µl formamide-based hybridization buffer (vial 7; Genisphere), 2 µl Array 50dT blocker (Genisphere), and 19 µl RNase/DNase-free water. The primary hybridization was performed by incubating 48 µl of sample on the microarray under a supported glass coverslip (Erie Scientific, Portsmouth, NH) for 16 to 20 h at 43°C at high humidity. The slides were then gently submerged for three sequential 11-min incubations in 2x SSC with 0.2% sodium dodecyl sulfate (SDS) at 43°C, 2x SSC at RT, and 0.2x SSC at RT and dried by centrifugation. Secondary hybridization was carried out using the complementary capture reagents provided in the 3DNA Array 350 kit (Genisphere). For each reaction mixture, 2.5 µl 3DNA capture reagent with Cy3, 2.5 µl 3DNA capture reagent with Cy5, 26 µl SDS-based hybridization buffer (vial 6; Genisphere), and 21 µl RNase/DNase-free water were used. These reagents were mixed and incubated in the dark for 10 min at 80°C, followed by 15 min at 50°C. For hybridization, each slide was incubated in the dark with 48 µl of this solution under a supported glass coverslip for 3 h at 65°C at high humidity. The slides were then submerged for three sequential 11-min incubations in 2x SSC with 0.2% SDS at 65°C, 2x SSC at RT, and 0.2x SSC at RT and dried by centrifugation. To prevent fluorophore degradation, the arrays were treated with Dyesaver (Genisphere) according to the manufacturer's instructions.
For data analysis, slides were scanned on a Perkin-Elmer ScanArray Express HT scanner to detect Cy3 and Cy5 fluorescence. Laser power was kept constant for Cy3/Cy5 scans, photomultiplier tube settings were varied for each experiment to optimize signal intensity with the lowest possible background fluorescence, and a low photomultiplier tube setting scan was also performed to recover signal from saturated elements. Gridding and image analysis were performed using ScanArray v3.0 (Perkin-Elmer, Boston, MA). Each spot was defined on a pixel-by-pixel basis using a modified Mann-Whitney statistical test, and the local background was subtracted from the resulting values. The mean signal and control intensities of the on-slide duplicate spots were calculated and Lowess normalized using GeneSpring 7.2 software (Agilent, Santa Clara, CA), with 20% of the data used to calculate the Lowess fit at each point, and the signal-to-Lowess-adjusted control ratios were calculated.
Gene deletion and complementation. To make gene deletion constructs, we PCR amplified each GMT gene and then replaced each coding sequence with a drug resistance marker. Primers listed in Table 1 were used with genomic JEC21 DNA to amplify GMT1 with 1,186 bp upstream and 590 bp downstream (primers 407 and 408) and GMT2 with 1,127 bp upstream and 1,482 bp downstream (primers 409 and 410). These products were column purified and cloned into pCR2.1-TOPO (Invitrogen). The geneticin drug resistance marker was PCR amplified from plasmid pMH12-T (from Jennifer Lodge, Saint Louis University) using primers 411 and 412 (Table 1). The forward primer introduced an NheI restriction digest site, and the reverse primer started at the SacII restriction site, truncating the 3' untranslated region by 479 bp. This PCR product was then cloned into the NheI and SacII restriction sites of the pCR2.1-TOPO plasmid containing GMT1, replacing all of the GMT1 coding sequence except for the last 17 bp. The nourseothricin resistance marker was similarly PCR amplified using primers 413 and 414 to introduce an EcoRV restriction site at the 5' end and an HpaI site at the 3' end. This was cloned into the NruI and HpaI blunt restriction sites of the pCR2.1-TOPO plasmid containing GMT2, replacing all of the coding sequence except for the last 122 bp; the remaining segment begins significantly downstream of the sequence encoding the "GALNK" region and lacks an in-frame start codon. Finally, the GMT flanking sequences and drug resistance cassettes of the final constructs were amplified by PCR using primers 407 to 410, gel purified, and biolistically transformed into JEC21 cells (55). The cells were allowed to recover for 24 h on YPD medium, transferred onto YPD plates containing 100 µg/ml nourseothricin or geneticin, and incubated at 30°C for 3 to 5 days. Genomic DNA was extracted from drug-resistant transformants and screened by PCR in the presence of 5% Me2SO (35) to confirm the absence of each GMT gene and the presence of the appropriate marker in its place. DNA blotting confirmed both gene replacements and that each marker cassette was present only once in the genome, with no additional ectopic insertions. Details of these studies are available upon request.
To complement the gmt1
strain, GMT1 with its flanking sequences was PCR amplified from the TOPO plasmid described above by using primers 407 and 408. This DNA was then biolistically transformed into the disruption strain, together with a PCR-amplified DNA fragment containing the nourseothricin drug resistance marker (generated as described above). Cotransformation was performed as described previously (20). Transformants were identified by resistance to nourseothricin and screened for a return to geneticin sensitivity, indicating the replacement of the disruption marker with the wild-type sequence. Complementation was verified by PCR analysis and DNA blotting.
Capsule induction. Single colonies were inoculated into 50 ml of YPD broth and grown overnight at 30°C. Cells were then washed with double-distilled water, and 2 x 106 cells/ml were inoculated into 10 ml DMEM (Sigma) in vented T-75 flasks. Flasks were incubated at 37°C in room air or in the presence of 5% CO2 for 16 h. Cells were then collected by centrifugation and resuspended in 50 µl of water, and 5 µl of this suspension was spotted onto a microscope slide with 2 µl of India ink. Cells were visualized using an Olympus BX-60 microscope (Center Valley, PA) with a x60 objective, and random fields were photographed and printed for manual measurement of capsule radius and cell diameter of 30 to 40 cells.
| RESULTS |
|---|
|
|
|---|
|
|
|
|
|
To examine GMT1 and GMT2 expression in more detail, we performed microarray analysis to assess the expression of each gene under a variety of growth conditions (see Materials and Methods). The media that have been historically developed for C. neoformans culture are those that either alter capsule production or induce cell stress, so a selection of such conditions was used (see Materials and Methods). In most media tested, the expression of GMT1 exceeded that of GMT2 by severalfold, consistent with the results from the growth conditions tested by quantitative reverse transcriptase PCR. The ratio of expression of the two genes varied, ranging from 1 for samples grown in PBS to over 14 for samples grown in DMEM (data not shown).
We next examined the influence of environment on the regulation of GMT1 and GMT2 independently. To do this, we assessed the expression of each gene in our set of growth conditions relative to expression of the same gene in a reference pool of mixed RNA samples (see Materials and Methods). This experiment allowed us to draw several conclusions. First, the expression of both genes changed with growth conditions (Fig. 5). Second, under the conditions tested, GMT1 expression (Fig. 5, top panel) was fairly stable, exhibiting only a 3.5-fold difference overall. In contrast, GMT2 expression (Fig. 5, lower panel) was quite variable, with a range of over 17-fold. Finally, the two genes are not coordinately regulated. For example, GMT1 expression was decreased by over 40% relative to the reference pool in PBS, while expression of GMT2 was increased severalfold. Expression of these genes reversed during growth in low-thiamine Littman's medium, where GMT1 expression was increased
25%, while the expression of GMT2 was reduced by almost half.
|
cells appeared to be duller than those of the wild type, the gmt2
mutant, or the complemented gmt1
mutant (not shown). This feature is typical of cells with a reduced or absent capsule, a finding that intrigued us because of the extensive mannosylation of capsule polysaccharides.
To pursue the possibility that gmt1
cells had altered capsules, we used India ink staining and light microscopy to assess the capsule sizes of disruption and wild-type strains. Cells disrupted in GMT1 had smaller capsules than the wild type in the DMEM medium tested, with a radius of 0.67 ± 0.05 µm compared to 1.06 ± 0.06 µm (P value of <0.0001 by Student's t test). We know that cryptococcal cells modulate capsule production in response to environment both in vitro and in vivo (26, 49, 58, 62), a process that is likely to be significant for pathogenesis. We therefore probed the mutant phenotype further by testing the response of gmt1
cells to growth in the same medium under a 5% CO2 atmosphere, a condition that leads to the formation of large capsules (62). When grown this way, the gmt1
mutant cells exhibited a striking defect in capsule formation (Fig. 6), which increased only slightly, to 0.94 ± 0.05 in radius compared to 3.29 ± 0.08 for the wild type (P value of <0.0001). As shown in Fig. 6, this defect was reversed in gmt1
cells complemented with GMT1 (3.12 ± 0.12) (P value of 0.22 compared to the wild type). gmt2
capsules were also similar to those of the wild type under these inducing conditions (3.36 ± 0.08) (P value of 0.56 compared to the wild type).
|
| DISCUSSION |
|---|
|
|
|---|
The presence of two GDP-Man transporters in C. neoformans is unique compared to the other fungi studied in this regard to date: C. albicans, C. glabrata, P. pastoris, and S. cerevisiae. Beyond yeast, several examples of multiple nucleotide sugar transporters with overlapping functions have been demonstrated. These include multiple UDP-galactose transporters described for plants (7), parasites (11a), and mammals (27, 61) and a set of five Golgi apparatus-localized proteins of Arabidopsis thaliana that all exhibit GDP-Man transport activity (8, 22).
One key question is whether Gmt1 and Gmt2 play different roles in the biology and pathogenesis of C. neoformans. Our expression data suggest that they do, because they demonstrate distinct patterns of regulation in response to growth conditions, despite similar biochemical characteristics. In particular, GMT1 is modestly regulated, with only a fewfold difference in expression under the growth conditions that we tested, while the expression of GMT2 is more dramatically modulated (Fig. 5). Furthermore, under all conditions but one, the magnitude of the observed changes in expression differed between the genes, and in several cases, these changes were in opposite directions.
Several of the growth conditions that we tested yielded cells with enlarged capsules, for example, growth in DMEM under CO2 compared to growth in room air or growth in PBS with fetal calf serum as opposed to growth in PBS alone. However, we did not observe any correlation between the expression of either GMT gene and capsule size (not shown). This may be because the diverse conditions sampled here also affect the overall metabolic state of the cell and thus simultaneously alter the transport requirements for GDP-Man needed to synthesize other glycoconjugates.
Intrigued by the distinct expression patterns of two very similar genes, we deleted GMT1 and GMT2. Both deletion strains grow well in culture, but gmt1
cells demonstrate reduced capsule and a marked defect in capsule induction (Fig. 6), while gmt2 cells are wild type. This finding links GDP-Man transport and capsule synthesis, supporting our recent conclusion that capsule synthesis occurs inside subcellular organelles (60).
A further puzzle is how Gmt1 and Gmt2 could serve different biological functions while performing the same biochemical activity. It may be that these proteins are differentially localized, perhaps to serve distinct biosynthetic pathways. We know that localization is critical for the appropriate function of these proteins, because the S. cerevisiae protein Hvg1p, a close homolog of Vrg4 that is resident in the endoplasmic reticulum, cannot complement vrg4-2 cells unless it is engineered to reach the Golgi apparatus (18). In contrast, when the cryptococcal transporters are expressed in yeast, both are probably localized to the Golgi apparatus, since they do complement vrg4-2 cells. It is possible that the two transporters occupy different regions of the Golgi apparatus in C. neoformans. A variety of proteins have been localized to subcompartments of the Golgi apparatus in mammalian systems (45), but current techniques do not allow sufficient resolution to examine protein localization within the smaller unstacked Golgi apparatus of Cryptococcus. Another possibility is that the two transporters associate with different synthetic machinery within the cell. In mammalian systems, there is precedent for the specific association of a nucleotide sugar transporter and a glycosyltransferase, which consumes the corresponding transport substrate (53).
Ultimately, distinguishing the biological roles of the proteins encoded by GMT1 and GMT2 must await detailed biochemical and morphological examinations of the two mutant strains to examine the effects of these mutations on other mannose-requiring processes and on cryptococcal virulence. The latter studies will be particularly important, since GDP-Man transporters are present in a variety of pathogens including fungi and parasites. Because the mammalian hosts of these organisms do not have such proteins, GDP-Man transporters have been suggested as potential targets of antimicrobial chemotherapy, a direction that merits further investigation.
| ACKNOWLEDGMENTS |
|---|
This work was supported by undergraduate research awards to T.R.C. from the Howard Hughes Medical Institute and the American Society for Microbiology, support to A.A.N. from NIH T32 GM007067, and support to T.L.D. from NIH R01 GM66303.
| FOOTNOTES |
|---|
Published ahead of print on 9 March 2007. ![]()
Present address: Medical Scientist Training Program, Johns Hopkins Medical School, Baltimore, MD 21205. ![]()
T.R.C. and C.L.G. contributed equally to this work. ![]()
| REFERENCES |
|---|
|
|
|---|